The wireless tubular motor PREMIUM 10 from Schellenberg is a smooth running motor for very heavy roller shutters with an area of up to 64 ft²*. It features an integrated wireless receiver, which allows you to use wireless automation for your roller shutters. The roller shutter motor can be conveniently controlled from far distances (for example from the sofa) and therefore provides maximum comfort and an improved lifestyle. At the same time, you are increasing the value of your home.

All Schellenberg wireless motors from the PREMIUM series are made of high quality and provide maximum safety. They feature overheating protection as well as obstacle detection. The smooth running wall bearing provides the quite opening and closing of your automatic shutter system.

Through the illustrated instructions installation is very easy. The roller shutter motor is pushed into the shutter shaft and uses its power directly from the octagonal shaft which ensures an effective and low-wear operation of the roller shutter motor.  There is no need for expensive wiring thanks to the wireless control. The wireless tubular motors from Schellenberg need only one power cord to the engine. The voltage corresponds to the standard 230 V and 50 Hz that is already used in your household. The setting of the end points and the turning direction can be comfortably programmed with the remote control.  All settings of the tubular motor are saved even during a power outage.

The following operating elements from the Schellenberg assortment are available for wireless control:

  • Wireless remote control 1-channel (It. No. 20015 or 20019)
  • Wireless remote control 5-channel (It. No. 20016 or 20020)
  • Wireless timer (It. No. 20031)
  • Wireless timer PREMIUM (It. No. 20032)

TIP: Per channel (operating element) up to 5 tubular motor can be opened and closed simultaneously. With a 5-channel remote control and a wireless timer PREMIUM up to 25 tubular motors can be controlled.

*With its maximum pulling force of 55 lbs the smooth running tubular motor can operate plastic roller shutters with a maximum area of 64 ft². This can vary depending on the material, design and weight of the shutters. However the maximum pulling force is always 55 lbs!


  • Maximum comfort through remote control or wireless timer (not included in delivery)
  • Increases the value of your home
  • Reduced cost of installation and cabling
  • With height adjustable with smooth running wall bearing
  • Reduced mounting depth thanks to the innovative motor
  • Adapter with large contact surface for optimal power transfer included
  • Simple and intuitive control and programming through remote controls or wireless timers (not included in delivery)
  • An intermediate layer is programmable
  • Permanent data retention during power outage
  • Powerful motor (230V), maintenance-free and quiet running 
  • Thermal overload protection
  • Obstacle detection and anti-lock (i.e. the freezing of the shutters)
  • Extensive, illustrated installation and operation instructions
  • 5 year guarantee
  • TÜV and CE approved
EAN Number 4003971205104
Item Number INT 20511
length (mm) 535 mm
Diameter (mm) 40 mm
Tensile Force (kg) 25 kg
Tensile Force (Nm) 10 Nm
max. tensile force (kg) 25 kg
max. tensile force (N) 10 kg
motor guarantee 5
max. roller shutter area KST m² 6.0
Roller shutter system MINI
End position setting via wireless sender
Color yellow
Operating Mode Wireless
Installation Instructions-20510 12.41 MB / Adobe Acrobat File Download

Product in use



 The tubular motor Premium 10 is compatible with the Roller Shutter System Maxi from Schellenberg. It is suitable for:

  • The wireless automatic control of roller shutter system
  • For heavy roller shutters with a maximum pulling force of 55 lbs, or plastic roller shutters with a maximum area of 64 ft² or aluminum roller shutters with a maximum area of 43 ft².  The power of the drive can vary due to different factors, for example the influence of specific constructions. From the above, no claims can be derived, as they may differ in individual cases. Do not exceed the maximum pulling force!
  • For octagonal shafts with a diameter of 40 mm

Helpful Hints for Installation


  • Remove the previous used mechanical belt
  • Loosen the shutters from the octagonal shaft
  • Take the octagonal shaft out of the roller shutter box and cut it if necessary
  • Attach the wall bracket to the roller shutter
  • Run the tubular motor in the octagonal shaft and move the unit into the wall bracket. Caution: Please let electrical work be carried out by authorized personnel only!
  • Attach the shutters again to the octagonal shaft
  • Program the direction and end points of the shutters
  • Begin to operate the roller shutters
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
To the top of the page