The wireless tubular motor Mini PREMIUM 6 from Schellenberg is a smooth running motor for your shutters. It features an integrated wireless receiver, which allows you to use wireless automation for your roller shutters. This provides maximum comfort and an improved lifestyle. With a remote control or wireless timer from Schellenberg you not only control your tubular motor min PREMIUM 6 wirelessly, but you also increase the value of your home. With its maximum pulling force of 33 lbs this tubular motor can operate plastic shutters with an area of 43 ft² or aluminum shutters with an area of 21 ft²*. The smooth running wall bearing provides the quite opening and closing of your automatic shutter system. The end point setting and the direction of the shutters can be conveniently controlled via remote control. With the illustrated installation instructions the assembly is easily done. The roller shutter motor is pushed into the shutter shaft and uses its power directly from the octagonal shaft which ensures an effective and low-wear operation of the roller shutter motor.  There is no need for expensive wiring thanks to the wireless control. The wireless tubular motors from Schellenberg need only one power cord to the engine. The voltage corresponds to the standard 230 V and 50 Hz that is already used in your household.



  • Low-wear and easy maintenance tubular motor
  • High quality parts
  • No noise thanks to the quite running wall bearing
  • Tubular motors with long lives
  • Optimal power transmission through adapter with large contact surface
  • Thermal protection against overheating of the roller shutters
  • Simple and intuitive programming via remote controls or wireless timers (not included in delivery)
  • An intermediate layer is programmable
  • Permanent data retention during power outage
  • Obstacle detection
  • Ready to install, adapter and adjustable wall bearing included
  • Electric end points can be set with remote control
  • Lower installation costs for cabling
  • Reduced mounting depth thanks to the innovative motor from Schellenberg
  • Detailed and illustrated installation and operating instructions
  • Increase the value of your home
  • CE and TÜV approved
  • 5 year guarantee

*This can vary depending on material, design and weight of the shutters. Do not exceed the maximum pulling force.

EAN Number 4003971205067
Item Number INT 20507
length (mm) 535 mm
Diameter (mm) 40 mm
Tensile Force (kg) 15 kg
Tensile Force (Nm) 6 Nm
max. tensile force (kg) 15 kg
max. tensile force (N) 6 kg
motor guarantee 5
max. roller shutter area KST m² 4.0
Roller shutter system MINI
End position setting via wireless sender
Color yellow
Operating Mode Wireless

Product in use



  • For the Schellenberg roller shutter system MINI
  • Octagonal shaft with 40 mm diameter
  • Maximal pulling force of 33 lbs: for plastic roller shutters with a max area of 43 ft² and aluminum shutters with a max area of 21 ft²*
  • The dimensions are 550 mm (corresponding to the length of the wireless tubular motor)

Helpful Hints for Installation

  • Remove the previous used mechanical belt
  • Loosen the shutters from the octagonal shaft
  • Take the octagonal shaft out of the roller shutter box and cut it if necessary
  • Attach the wall bracket to the roller shutter
  • Run the tubular motor in the octagonal shaft and move the unit into the wall bracket. Caution: Please let electrical work be carried out by authorized personnel only!
  • Attach the shutters again to the octagonal shaft
  • Program the direction and end points of the shutters
  • Begin to operate the roller shutters via remote control or wireless timer
to Schellenberg Professional

the partner for craftsmen and assembly professionals

go to Schellenberg Professional
To the Schellenberg online shop

Go to the online shop here ...

Continue to the online shop
To the top of the page